Accessories and Spare Parts for Aillio Bullet Coffee Roasters

High-quality, 3-piece set of exhaust adapters for the Aillio Bullet coffee roaster. 3D printed from ASA plastic (more temperature-resistant than ABS) with a minimum infill of 80%. Tested and recommended by Aillio for use up to 220°C IBTS temperature. Set includes: Adapter for machine exhaust hole Adapter for the hose or pipeAdapter for the cooling tray Important Usage NoticeThe exhaust pipes or hoses must not be suspended from or supported by the plastic adapter. No pulling force, weight or pressure should be applied to the adapter.The exhaust system must therefore be supported and strain-relieved separately. The pipe or hose should only rest lightly on or be fitted loosely onto the plastic adapter without placing any mechanical load on it.Please also ensure that the exhaust air can flow freely and unobstructed through the entire exhaust system at all times. Restrictions, blockages or any other conditions that could cause heat to build up must be avoided.Mechanical stress or insufficient airflow can cause excessive heat to accumulate around the adapter. This may cause the plastic adapter to deform or melt, making it unusable.3D printing:You can also produce these plastic adapters yourself. Aillio’s official 3D printing files are available at the following link: https://docs.aillio.com/bullet-r1/replacement-guides/bullet-r1-3d-exhaust-adapter/

Replacement filter for the radiator fan of the Aillio Bullet R1 V2

Bean deflector - Coffee bean guide plate for Aillio Bullet R1 V2. Easy installation. The plate guides the coffee beans as they exit the roasting drum, ensuring they fall into the cooling box in a controlled manner.

Replacement chaff collection filter for Aillio Bullet R1 V2

Replacement fan for the IBTS sensor of the Aillio Bullet R1 Replacement instructions: Aillio - IBTS Fan Replacement from Aillio Official on Vimeo.

Replacement ball bearing for Aillio Bullet R1 V2

Replacement Chaff Collector for the Aillio Bullet R1 V2, R2 resp. R2 Pro . Includes: Chaff Collector Chaff Collector Filter Chaff Collector Filter Adapter Cover for Chaff Collector

Replacement impeller for exhaust for Aillio Bullet R1 V2

Replacement adapter for chaff collection filter for Aillio Bullet R1 V2

Replacement cover (Bean Chute Plug) for bean chute for Aillio Bullet R1 V2

External replacement cable for connecting the cooler fan of the Aillio Bullet R1 V2

Replacement induction module for Aillio Bullet R1 V2

Sample spoon for the Aillio Bullet R1 V2.

Replacement washer for the door handle of the Aillio Bullet R1

Replacement NTC temperature probe for the Aillio Bullet R1 Replacement instructions: Aillio - Bean Probe Replacement from Aillio Official on Vimeo.

Replacement pen for the door of the Aillio Bullet R1

Replacement motor for the exhaust fan (impeller) for Aillio Bullet R1 V2 **ATTENTION: there are two versions** This is the new version, identifiable by the silver surface of the motor Installation: [Embed video tutorial for installation](https://player.vimeo.com/video/422353010?color=ffffff&title=0&byline=0&portrait=0) [Watch the video on Vimeo](https://vimeo.com/422353010) by [Aillio Official](https://vimeo.com/aillioofficial)

Replacement circuit board for the Aillio Bullet R1.

Replacement fan for the power supply board (Power PCB) of the Aillio Bullet R1

Replacement Control Panel Cover for Aillio Bullet R1 V2

Replacement cover rear left for Aillio Bullet R1 V2

Replacement door hinges for the Aillio Bullet R1

Replacement cover (Chaff Plug) for chaff collector for Aillio Bullet R1 V2

Replacement fan for bean cooler of the Aillio Bullet R1 V2