Practical Accessories and Spare Parts
Here you will find spare parts for your coffee roaster from the brands Aillio, Gene Café, Kaffelogic, Hottop, Behmor, and Nucleus Link. Additionally, you will find practical accessories for coffee roasting, Roast Rebels gift vouchers, and much more.
The rear filter of the Hottop roaster should be replaced after about 20 roasts. If the beans are ejected too early because it gets too hot in the roaster, the filter may be too dirty and the air may not circulate properly. The filter comes together with the plastic housing and can be easily replaced.
The upper filter of the Hottop roaster should be replaced after approximately 100 roasts. The filter is attached with two screws and easy to replace.
High-quality, 3-piece set of exhaust adapters for the Aillio Bullet coffee roaster. 3D printed from ASA plastic (more temperature-resistant than ABS) with a minimum infill of 80%. Tested and recommended by Aillio for use up to 220°C IBTS temperature. Set includes: - Adapter for machine exhaust hole - Adapter for the hose or pipe - Adapter for the cooling tray
Replacement filter for the radiator fan of the Aillio Bullet R1 V2
Content: 3 Stück (CHF 3.30 / 1 Stück)
Bean deflector - Coffee bean guide plate for Aillio Bullet R1 V2. Easy installation. The plate guides the coffee beans as they exit the roasting drum, ensuring they fall into the cooling box in a controlled manner.
You can store your coffee well after roasting in these coffee bags. They have a stable base and a valve through which the coffee can degas well in the first few days after roasting. Thanks to the zipper closure, you can easily reseal the bags airtight. A coffee bag can hold 250 grams of freshly roasted coffee. Attention, on some screens the bags may appear white in the picture, but they are actually natural brown. The ökoline bags are produced in Germany. They are made of brown kraft paper and barrier film that is free of aluminium. The paper used is certified according to FSC guidelines. The FSC label ensures that only wood from forests that are environmentally friendly, socially responsible, and economically viable is used for the paper. The barrier film on the inside of the packaging is an environmentally friendly, recyclable PE composite. It effectively shields oxygen, extending the shelf life of the coffee and preserving freshness and aroma longer. Unlike conventional packaging with aluminium, the energy required for the production of the packaging is lower. Width: 16cm, Height: 24cm The bags are sold in packs of 25 each.
Content: 25 Stück (CHF 1.00 / 1 Stück)
The Chaff Collector is made of high-quality borosilicate glass, allowing a clear view of the beans during roasting and easy removal of the silver skins (chaffs) after roasting. It is included in the standard delivery of each machine. It fits all Kaffelogic Nano 7 devices as well as the Nucleus Link coffee roaster. Owners of first-generation devices that still have the old version of the Chaff Collector made of metal and plastic mesh can also use this Chaff Collector on their machine. In this case, an adjustment of the fan calibration is recommended: https://youtu.be/BXl2NB_LwW4
Vouchers for the online shop of Roast Rebels. The value is freely selectable (in increments of 10€). After purchase, a voucher code will be created for the desired amount and sent electronically. Upon request, we also create a designed voucher and send it as a PDF.
Cooler for the quick cooling of self-roasted coffee beans. High-quality processed for the fast and even cooling of the coffee. Benefits: - Fast and even cooling of roasted coffee - Up to 400g capacity - Easy operation - Quiet - Coffee husks are collected and do not spread in the house - High-quality processing Product specifications: - Cooling time: 1 minute - Capacity: 400g - Power supply: AC 230V - 60Hz - Power consumption: 43W (220V) - Dimension: 200 x 185 mm - Net weight: 2kg Scope of delivery: - Coffee beans cooler - Stainless steel container for the beans - Power cord - Allen key - Manual
These paper filters were specifically designed for the Behmor Brazen coffee machine. They are 100 pieces of high-quality flat-bottom paper filters.
Content: 100 Stück (CHF 0.15 / 1 Stück)
The rubber stopper / rubber buffer in the roasting drum is the only part that can wear out in the Gene Café roaster. A replacement rubber is already included with the roaster and is attached to the user manual. The replacement rubbers are very easy to install, we ship them in a pack of 3 pieces.
Content: 3 Stück (CHF 2.63 / 1 Stück)
Original spare part from Gene Café: Side Cover Left and Right as a pair We are always available to assist with any questions regarding replacement.
Content: 2 Stück (CHF 7.48 / 1 Stück)
Replacement chaff collection filter for Aillio Bullet R1 V2
Replacement fan for the IBTS sensor of the Aillio Bullet R1 Replacement instructions: Aillio - IBTS Fan Replacement from Aillio Official on Vimeo.
Replacement Chaff Collector for the Aillio Bullet R1 V2. Includes: - Chaff Collector - Chaff Collector Filter - Chaff Collector Filter Adapter - Cover for Chaff Collector
Original replacement part from Gene Café: Replacement Heating Element We are always available to assist with any questions regarding the replacement. Manufacturer Part Number: CRA97-004A Replacement Heater Assembly for Gene Café CBR-101
Behmor Brazen 3.0 coffee machine – Precise filter coffee in barista quality for your home.
Original spare part from Gene Café: Roasting chamber / Roast chamber We are always available to answer any questions regarding the replacement. Manufacturer part number: CR54-002A
Replacement impeller for exhaust for Aillio Bullet R1 V2
Replacement adapter for chaff collection filter for Aillio Bullet R1 V2
Replacement cover (Bean Chute Plug) for bean chute for Aillio Bullet R1 V2
External replacement cable for connecting the cooler fan of the Aillio Bullet R1 V2