Accessories and Spare Parts for Hottop Coffee Roasters
Here you will find the most common spare parts for Hottop coffee roasters as well as proven accessories that significantly facilitate roasting with the Hottop. If you need parts that are not listed, feel free to contact us directly at: team(at)roastrebels.com.
The rear filter of the Hottop roaster should be replaced after about 20 roasts. If the beans are ejected too early because it gets too hot in the roaster, the filter may be too dirty and the air may not circulate properly. The filter comes together with the plastic housing and can be easily replaced.
The upper filter of the Hottop roaster should be replaced after approximately 100 roasts. The filter is attached with two screws and easy to replace.
With the upgrade kit, you can convert your existing Hottop roaster into the current top model: KN-8828B-2K+
For the conversion, some manual skill is required as you will be opening the roaster completely. Here you can find the conversion manual (in English).
Please contact us before ordering to ensure that you receive the correct kit: ingo@roastrebels.com
There are two variants, depending on which roaster you have:
current: KN-8828B-2/KN-8828B-2K/KN-8828P-2/KN-8828P-2K
The kit (Hottop Upgrade Kit 105) includes:
KN-8828B-2K+ Control Panel
Two KN-8828B-2K+ K-Temperature Sensors
New Heating Element
New Back of the Heating Chamber
Control Panel Cover
USB Cable
Electromagnetic Return Spring
Electromagnetic Cover
Various Screws
current: KN-8828B/KN-8828P
The kit (Hottop Upgrade Kit 106) includes:
KN-8828B-2K+ Control Panel
Two KN-8828B-2K+ K-Temperature Sensors
New Heating Element
New Back of the Heating Chamber
Control Panel Cover
USB Cable
Electromagnetic Return Spring
Electromagnetic Cover
Conversion of the back including emergency button
Various Screws
Attention, with these roaster models, there were two different sizes of the chaff drawers, let us know if you have a large or a small drawer.
